Get even more out of your tractor
Tractor Back Blades
You can also check out our catalog if you are interested in learning more about our Back Blades!
New Powder Coat process to extend the life and look of your blade
HD Hydraulic Pump With Float Now Available On Hydraulic Wing Models
Tractor Back Blade models Now Available With 3-Point mounts
to fit cat 3 tractors and most
quick connect adapters
Ebling Back Blade Products
Trucks and Tractors:
16ft Hydraulic Wing Truck Backblade
IN STOCK
- Heavy duty back blade designed for 3/4 ton and 1 ton single rear wheel trucks.
- 90" Moldboard.
- 21" blade height
- Approximately 4ft wings
- Overall width in the open position: 16'
- Overall width in the closed position: 8'
- Approximate blade weight: 825 lbs.
- 4 arm lift system ensures a straight vertical lift pattern.
- Adjustable top arms to accommodate different height trucks.
- Adjustable QD arms making the blade universal to fit other trucks.
- Bucher hydraulic pump is hard wired to the vehicles electrical system.
- Hydraulic pump is mounted to the plow and is protected by a 3/16 steel pump box with an easy to remove steel top.
- Hydraulic down pressure for maximum scraping action. Relief set at 2300 lbs.
- 1/2" Carbon steel moldboard cutting edge and durable 1 1/2" x 6" Type 2 Polyurethane wing cutting edges are standard.
- Horizontal Spring bar keeps the back blade level while in the up position.
- Break away shear bolt on each wing along with hydraulic relief reduces the possibility for cylinder and wing damage when an obstruction is hit.
- Remote switch at rear of truck mounted on a stainless steel plate or recessed in the bed of truck for quick attach/detach of back blade.
- Professional control box can be mounted in cab and unplugged during off season.
- Full use of truck tailgate
- Built in plow stand for off season storage.
- Ebling Truck Mount replaces OEM receiver hitch for all Ford and 19-prior GM trucks. Ebling truck mount is installed on 20-newer GM & Dodge trucks without disrupting the 2" receiver hitch.
- Ebling Truck Mount is specific to vehicle make/model/year/box length
- Consult Ebling when mounting to trucks with dual wheels or trucks that have a flat/dump bed.
- Powder coat finish.
- 1 year warranty
14ft Hydraulic Wing Truck Backblade
IN STOCK
- Heavy duty back blade designed for 3/4 ton and 1 ton single rear wheel trucks.
- 90" Moldboard.
- 21" blade height
- Approximately 3ft wings
- Overall width in the open position: 14'
- Overall width in the closed position: 8'
- Approximate blade weight: 775 lbs.
- 4 arm lift system ensures a straight vertical lift pattern.
- Adjustable top arms to accommodate different height trucks.
- Adjustable QD arms making the blade universal to fit other trucks.
- Bucher hydraulic pump is hard wired to the vehicles electrical system.
- Hydraulic pump is mounted to the plow and is protected by a 3/16 steel pump box with an easy to remove steel top.
- Hydraulic down pressure for maximum scraping action. Relief set at 2300 lbs.
- 1/2" Carbon steel moldboard cutting edge and durable 1 1/2" x 6" Type 2 Polyurethane wing cutting edges are standard.
- Break away shear bolt on each wing along with hydraulic relief reduces the possibility for cylinder and wing damage when an obstruction is hit.
- Remote switch at rear of truck mounted on a stainless steel plate or recessed in truck bed for quick attach/detach of back blade
- Professional control box can be mounted in cab and unplugged during off season.
- Full use of truck tailgate
- Built in plow stand for off season storage.
- Ebling Truck Mount replaces OEM receiver hitch for all Ford and 19-prior GM trucks. Ebling truck mount is installed on 20-newer GM & Dodge trucks without disrupting the 2" receiver hitch.
- Ebling Truck Mount is specific to vehicle make/model/year/box length.
- Consult Ebling when mounting to trucks with dual wheels or trucks that have a flat/dump bed.
- Powder coat finish.
- 1 year warranty
12ft Hydraulic Wing Truck Backblade
IN STOCK
- Heavy duty back blade designed for 3/4 ton and 1 ton single rear wheel trucks.
- 90" Moldboard.
- 21" blade height
- Approximately 2ft wings
- Overall width in the open position: 12'
- Overall width in the closed position: 8'
- Approximate blade weight: 715 lbs.
- 4 arm lift system ensures a straight vertical lift pattern.
- Adjustable top arms to accommodate different height trucks.
- Adjustable QD arms making the blade universal to fit other trucks.
- Bucher hydraulic pump is hard wired to the vehicles electrical system.
- Hydraulic pump is mounted to the plow and is protected by a 3/16 steel pump box with an easy to remove steel top.
- Hydraulic down pressure for maximum scraping action. Relief set at 2300 lbs.
- 1/2" Carbon steel moldboard cutting edge and durable 1 1/2" x 6" Type 2 Polyurethane wing cutting edges are standard.
- Break away shear bolt on each wing along with hydraulic relief reduces the possibility for cylinder and wing damage when an obstruction is hit.
- Remote switch at rear of truck mounted on a stainless steel plate or recessed in truck bed for quick attach/detach of back blade.
- Professional control box can be mounted in cab and unplugged during off season.
- Full use of truck tailgate
- Built in plow stand for off season storage.
- Ebling Truck Mount replaces OEM receiver hitch for all Ford and 19-prior GM trucks. Ebling truck mount is installed on 20-newer GM & Dodge trucks without disrupting the 2" receiver hitch.
- Ebling Truck Mount is specific to vehicle make/model/year/box length
- Consult Ebling when mounting to trucks with dual wheels or trucks that have a flat/dump bed.
- Powder coat finish.
- 1 year warranty
8ft. Fixed wing Truck Backblade
TAKING ORDERS
- Heavy duty back blade designed for 3/4 ton and 1 ton single rear wheel trucks.
- 96" Moldboard.
- 21" blade height
- 2ft wings bolted to the side of the moldboard
- Support arm on inside of each wing creates a strong rigid plow corner.
- Approximate blade weight: 610 lbs.
- 4 arm lift system ensures a straight vertical lift pattern.
- Adjustable top arms to accommodate different height trucks.
- Adjustable QD arms making the blade universal to fit other trucks.
- Bucher hydraulic pump is hard wired to the vehicles electrical system.
- Hydraulic pump is mounted to the plow and is protected by a 3/16 steel pump box with an easy to remove steel top.
- Hydraulic down pressure for maximum scraping action. Relief set at 2300 lbs.
- 1/2" Carbon steel moldboard cutting edge and durable 1 1/2" x 6" Type 2 Polyurethane wing cutting edges are standard.
- Remote switch at rear of truck mounted on a stainless steel plate or recessed in truck bed for quick attach/detach of back blade.
- Professional control box can be mounted in cab and unplugged during off season.
- Full use of truck tailgate
- Built in plow stand for off season storage.
- Ebling Truck Mount replaces OEM receiver hitch for all Ford and 19-prior GM trucks. Ebling truck mount is installed on 20-newer GM & Dodge trucks without disrupting the 2" receiver hitch.
- Ebling Truck Mount is specific to vehicle make/model/year/box length
- Consult Ebling when mounting to trucks with dual wheels or trucks that have a flat/dump bed.
- Powder coat finish.
- 1 year warranty.
Sidekick 7, 7.5 or 8′ For
1/2 Ton Trucks & UTVs
TAKING ORDERS
- Designed for 1/2-1 ton pickup trucks, SUV''s, Jeeps and most 4wd vehicles with a 2" receiver style trailer hitch.
- The SIDEKICK attachment system slides into a vehicles existing 2" receiver hitch and is supported by 2 additional ratchet style straps.
- 2 arm lift system is adjustable to fit different vehicle heights.
- 7 gauge Universal moldboard is adjustable from 7ft-7.5ft-8ft to accommodate different vehicle widths. Simply slide in or out to desired width and bolt in place.
- Self contained Bucher hydraulic pump is hard wired to the vehicles electrical system and is protected from the elements by a steel pump box with removable top.
- Hydraulic down pressure for excellent scraping action.
- Professional control box can be mounted in cab and unplugged during off season.
- Carbon steel cutting edge on the main moldboard and 1 1/2"x 6" Polyurethane cutting edges on the wings is standard.
- Plow stand for off season storage.
- Approximately 382 lbs.
- Powder-coat finish.
- 1 year Warranty
12ft & 16ft Category 1 Tractor Backblade
IN STOCK
- Heavy duty back blade designed for 4wd tractors with a minimum of 50hp and a Category I or 2 three point hitch.
- 3-Point Mount Fits Most Quick Connect Adapters.
- One piece all welded construction on moldboard and wings.
- 96" Moldboard accepts a 2ft or 4ft wing to make the blade 12ft or 16ft overall.
- Moldboard cutting edge is raked forward for improved scraping action.
- 3/4" x 6" Carbon steel cutting edge on main moldboard and 1 1/2"x 6" Polyurethane cutting edge on wing is standard.
- Break away shear bolt on each wing reduces the possibility for cylinder and wing damage when an obstruction is hit.
- Controls utilize the on-board 3 point and auxiliary hydraulics of the tractor.
- 2 sets of hydraulic remotes are required on the tractor for independent wing control.
- Wings rotate 90 degrees total and may be started or stopped in any position.
- Blade height: 24"
- Moldboard size: 96"
- Approximate wing size: 24" or 48"
- Blade width closed: 104"
- Blade width fully open: 144" or 192"
- Approximate blade weight: 725lbs or 875 lbs
- Powder Coat finish
- 1 year warranty
16ft Category 2 Tractor Backblade
IN STOCK
- Heavy duty back blade designed for 4wd tractors with a minimum of 50hp and a Category 1, 2 or 3 three point hitch.
- 3-Point Mount Fits Most Quick Connect Adapters
- One piece all welded construction on moldboard and wings.
- Moldboard also accepts a 3ft wing to make the blade 16ft overall.
- Moldboard cutting edge is raked forward for improved scraping action.
- 3/4" x 6" Carbon steel cutting edge on main moldboard and 1 1/2"x 6" Polyurethane cutting edge on wing is standard.
- Break away shear bolt on each wing reduces the possibility for cylinder and wing damage when an obstruction is hit.
- Controls utilize the on-board 3 point and auxiliary hydraulics of the tractor.
- 2 sets of hydraulic remotes are required on the tractor for independent wing control.
- Wings rotate 90 degrees total and may be started or stopped in any position.
- Blade height: 30"
- Moldboard size: 102"
- Approximate wing size: 32"
- Blade width closed: 110"
- Blade width fully open: 192"
- Approximate blade weight: 1058 lbs
- Powder Coat finish
- 1 year warranty
Check out the Truck Back Blades
Ebling Back Blade in Action:
You can also check out our catalog if you are interested in learning more about our Back Blades!
Custom Sized Back Blades Available
Look What stopped in for a visit, 25 Year
Old 1st Gen Hydraulic wing Back blade
still moving snow!
cUSTOM COLORS AVAILABLE
